Settings And Checking ~Specifying The Midi Input/Output Destination; Windows Xp Users - Edirol PCR-M30 Owner's Manual

Getting Connected and Installing Drivers (Windows)
Settings and checking
~Specifying the MIDI input/output destination~

Windows XP users

Make the following settings so that you can use the MIDI functionality of the
PCR-M30/50/80. For a connection diagram, refer to "Basic connections
and MIDI flow" (p. 40).
1
Open Control Panel.
Click the Windows start menu, and from the menu that appears, select
Control Panel.
2
Open the Sounds and Audio Devices Properties dialog box.
In "Pick a category" click "Sound, Speech, and Audio Devices." Next, in
"or pick a Control Panel icon," click the sounds and Audio Devices icon.
3
Click the Audio tab.
fig.XP-E
4
For MIDI music playback, click the ▼
located at the right of [Default
device], and select the MIDI device
from the list that appears.
If you want to use Media Player to play
a sound module connected to the
PCR's MIDI OUT connector, select
EDIROL PCR MIDI OUT.
5
Close the Sounds and Audio Devices Properties dialog box.
Click [OK] to complete the settings.
This completes settings for using the PCR with an software that uses the standard Windows device
settings, such as Media Player.
For details on how to make these settings, refer to the owner's manual for your software.
For details on the PCR's input/output devices, refer to "Input / output devices" (p. 43).
26
Depending on how your
system is set up, the
Sounds and Audio
Devices icon may be
displayed directly in the
Control Panel (the Classic
view). In this case, double-
click the Sounds and
Audio Devices icon.
Select the appropriate
MIDI device for your
system. You do not
necessarily have to select
EDIROL PCR MIDI OUT.
For details on the PCR's
input/output devices,
refer to"Input / output
devices" (p. 43).