Basic connections and MIDI flow
USB connections with your computer
- Sending MIDI messages to your application -
fig.connect-basic
USB cable
EV-5
(sold separately)
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and
turn off the power on all devices before making any connections.
* Use only the specified expression pedal (EV-5; sold separately). By connecting any other expression
pedals, you risk causing malfunction and/or damage to the unit.
MIDI flow
Turn MIDI I/F MODE OFF as described in "MIDI I/F MODE" (p. 94).
fig.flow-USB-b
MIDI I/F MODE OFF
PC
MIDI OUT DEVICE
EDIROL PCR MIDI OUT
EDIROL PCR
MIDI IN DEVICE
EDIROL PCR MIDI IN
EDIROL PCR 1
EDIROL PCR 2
BULK RECEPTION
PORT 1
PORT 2
BULK TRANSMISSION BULK data is transmitted from here
* For an explanation of the items in the diagram, refer to "Input / output devices" (p. 43).
40
DP Series (sold separately)
PCR-M30/50/80
USB
BULK RECEPTION
PORT 1
PORT 2 /
BULK TRANSMISSION
BULK data is received here
Of the keyboard, bender lever, and other controllers, those that have been set to
PORT 1 will transmit data from here
Of the keyboard, bender lever, and other controllers, those that have been set to
PORT 2 will transmit data from here
It is not necessary to connect the AC
adaptor if you are using a USB connection.
However, with some computers, the PCR-
M30/50/80 may not operate when powered
from the USB bus. In this case, set the
power switch to the DC position and
connect the AC adaptor.
MIDI OUT
MIDI IN
AC adaptor