Problems When Using The Pcr-M30/50/80 - Edirol PCR-M30 Owner's Manual

Troubleshooting

Problems when using the PCR-M30/50/80

Sound is interrupted during MIDI playback
• In Windows, did you make the setting described in "Giving priority to background
services"?
In order to ensure that MIDI processing occurs smoothly, make the setting described in "Giving
priority to background services."(➔Windows XP(p. 20), Windows 2000(p. 24))
Can't play back / record MIDI
• Did you plug in the USB cable, or unplug it while an application was running?
Exit all applications that are using the PCR-M30/50/80, and exit all applications that are using
the PCR-M30/50/80, and re-connect the PCR-M30/50/80.
• Is your computer in Suspend or Sleep mode?
If so, get your computer to resume normal operation, then exit all applications that are using
the PCR-M30/50/80. Next, turn the PCR-M30/50/80's power off, then switch it on again.
• Have you specified the MIDI data output destination in your playback software?
For some software, you may need to specify the PCR-M30/50/80 as the output destination for
MIDI data. For details on making this setting, refer to the owner's manual of the software you
are using.
• Was the driver installed correctly?
In order for you to play back audio data via the PCR-M30/50/80, the driver must be installed.
For installation and settings, refer to "Getting Connected and Installing Drivers" (Windows:
p. 16/ Macintosh: p. 29).
• Are you running multiple applications?
If multiple applications are running simultaneously, an error message may appear. If this
occurs, click [OK] and exit the other applications.
Even if an application window is closed, it is still running if it appears in the taskbar. Be sure to
exit unneeded applications displayed.
Playback or recording halts midway through, and then
becomes impossible
• Was a heavy processing load experienced while using the PCR-M30/50/80, such as
accessing the CD-ROM drive or a network?
If an operation involving a heavy processing load is performed while the PCR-M30/50/80 is in
use, it may not operate correctly. If this occurs, stop playback/recording, and then try resuming
playback/recording. If you are still unable to play back/record, exit all applications that use the
PCR-M30/50/80, switch off the PCR-M30/50/80, then turn it on again.
110