Getting Connected And Installing Drivers (Macintosh); Mac Os X Users; Installing The Driver - Edirol PCR-M30 Owner's Manual

Getting Connected and Installing
Drivers (Macintosh)
The installation procedure will differ depending on your system.
Please proceed to one of the following sections, depending on the system you
use.
• Mac OS X users......................................................................... (p. 29)
• Mac OS 9 users ......................................................................... (p. 32)

Mac OS X users

Installing the driver

If the "Authenticate" dialog box appears during the installation, input the
password and click "OK."
1
Disconnect all USB cables other than those for your keyboard and mouse,
and restart your Macintosh.
2
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
3
In the Driver (Mac OS X) folder of the CD-ROM, double-click
PCRUSBDriver.pkg.
4
The display will indicate "Welcome to the EDIROL PCR Driver Installer."
Click [Continue].
5
The display will indicate "Select a Destination."
Click the drive in which the operating system is installed to select it, and then
click [Continue].
6
The display will indicate "Easy Install."
Click [Install] or [Upgrade].
7
The display will indicate "Installing this software requires you to restart
your computer when the installation is done."
Click [Continue Installation].
8
The display will indicate "The software was successfully installed."
Click [Restart] to restart your computer.
This completes installation of the PCR driver.
Next, make MIDI device settings.
What you actually see on
your computer screen may
be different, depending on
your computing
environment and the
operating system you're
using.
Select your startup disk as
the drive.
29