Tempo Assign - Edirol PCR-M30 Owner's Manual

TEMPO ASSIGN

You can assign a controller to adjust the speed (20-250) of the F8 Clock message.
* In order to transmit F8 Clock messages, the F8 CLOCK setting must be "ON."
(➔"F8 CLOCK ON/OFF" (p. 90))
fig.edt
1
Press the [EDIT] button.
The display will indicate "EDT."
fig.r-1
2
Slightly move the controller to which you want to assign TEMPO. In the case
of a button, press that button.
The display will indicate the number of the selected controller.
3
Confirm what's indicated and press the [ENTER] button.
4
Press the [TEMPO] key.
The display will indicate "TMP."
fig.tmp
5
Confirm what's indicated and press the [ENTER] button.
6
If you are making the assignment for a button, specify the button mode.
(➔"Specifying the button mode" (p. 59))
* In the case of a button, the value will be fixed at maximum (250) for ON, and minimum (20) for OFF.
Use MIDI functionality
81