Windows 2000 / Me Users - Edirol PCR-M30 Owner's Manual

Windows 2000 / Me users

Make the following settings so that you can use the MIDI functionality of the
PCR-M30/50/80. For a connection diagram, refer to "Basic connections
and MIDI flow" (p. 40).
1
Open Control Panel.
Click the Windows Start menu, and from the menu that appears, select
Settings | Control Panel.
2
Open the Sounds and Multimedia Properties.
In Control Panel, double-click the Sounds and Multimedia icon to open the
Sounds and Multimedia Properties dialog box.
3
Click the AUDIO tab.
fig.2K-E
4
For MIDI music playback, click the ▼
located at the right of [Preferred
device], and select the MIDI device
from the list that appears.
If you want to use Media Player to play
a sound module connected to the
PCR's MIDI OUT connector, select
EDIROL PCR MIDI OUT.
5
Close the Sounds and Multimedia Properties dialog box.
Click [OK] to complete the settings.
This completes settings for using the PCR with an software that uses the standard Windows device
settings, such as Media Player.
For details on how to make these settings, refer to the owner's manual for your software.
For details on the PCR's input/output devices, refer to "Input / output devices" (p. 43).
Getting Connected and Installing Drivers (Windows)
If the Sound and
Multimedia icon is not
displayed, click "Show all
control panel options" in
the frame at the left.
Select the appropriate
MIDI device for your
system. You do not
necessarily have to select
EDIROL PCR MIDI OUT.
For details on the PCR's
input/output devices,
refer to "Input / output
devices" (p. 43).
27