Program Change mode (PROGRAM CHANGE)
This mode lets you transmit a program change message on the Current channel (p. 48).
fig.PC-1_75
3
fig.program
1
Press the [PROGRAM CHANGE] button.
The [PROGRAM CHANGE] button will light. The display will indicate the
program change that was transmitted most recently.
* The [HEX] or [DECIMAL] button will also light according to the input mode
(p. 49).
2
Use the [DEC][INC] buttons or the [0]-[F] keys of the keyboard to specify the program change
you want to transmit.
DEC
Change the current value by -1
INC
Change the current value by +1
The input value
00- 0F
3
Press the [ENTER] button.
The setting will be cancelled if you press another button instead of the [ENTER] button.
The program change has now been transmitted.
2
1
HEX...00-7F
DECIMAL...1-128
Use MIDI functionality
51