Transmitting/Receiving Bulk Data (Bulk) - Edirol PCR-M30 Owner's Manual

Transmitting/receiving bulk data (BULK)

Bulk dump allows a large amount of data to be transferred in a single operation. For example,
this can be used to store all settings of a device into a computer or sequencer.
* When you transmit or receive Bulk data, the contents of the current memory (p. 84)will be lost. Save
the current memory settings as needed before you perform this operation.
■ Receive mode
fig.edt
1
Press the [EDIT] button.
The display will indicate "EDT."
fig.blr
2
Press the [BULK] key.
The display will blink "BLR" (Bulk Receive).
fig.rs
3
Confirm what's indicated and press the [ENTER] button.
The display will indicate "RS," and the "S" will blink.
4
Use the [DEC] [INC] buttons or the [0] [1] keys to select the mode.
0
1
fig.rs1
5
Confirm what's indicated and press the [ENTER] button.
The third digit of the display will blink, and the PCR-M30/50/80 will wait to
receive bulk data.
A memory will be received as bulk data. The received data will
SINGLE BULK
overwrite the current memory. Memories 1-F will not be affected.
All memories will be received as bulk data. The received data will
ALL BULK
overwrite memories 1-F.
Use MIDI functionality
85