Handset Option For The Avaya 3905 Digital Deskphone - Avaya 3900 Series User Manual

Installation

Handset option for the Avaya 3905 Digital Deskphone

The Handset Kit is a hardware option for the Avaya 3905 Digital Deskphone. The handset does
not accompany the Avaya 3905. The handset can be added to the Avaya 3905 by removing
the front plate of the telephone.
Important:
Avaya recommends that a system administrator complete this installation.
Figure 20: Removal of the hook switch cover
There are five tabs and two hidden snaps on the Hook Switch cover. There are two tabs along
the right tab tree along the bottom edge (front view). To remove the cover, you must release
the hidden snaps (rear view).
Remove the Hook Switch Cover
1. Ease the cover to the left and pull on the left side to release the left snap.
2. While holding the left snap out, ease the cover to the right and pull on the right
3. Carefully maneuver the cover out from the three bottom slots and rotate the cover
100 Avaya 3900 Series Digital Deskphones User Guide
side to release the right snap.
to release the two side tabs.
August 2010