Connecting A Handset To Avaya Vantage; Connecting The Handset Cradle To Avaya Vantage - Avaya Vantage Installing And Administering

Wireless handset state
Wireless handset has been turned
on.
Wireless handset has been turned
off.
Power button
The Power button provides the following functionality:
Action
Turn on the handset
Turn off the handset
Enable pairing mode

Connecting a handset to Avaya Vantage

™
Avaya Vantage provides a built-in speaker and microphone, so a handset is not required to make
and manage calls. You can purchase either wired or wireless handsets separately. To use a handset
with Avaya Vantage

Connecting the handset cradle to Avaya Vantage

About this task
Use this procedure to connect your handset cradle to the Avaya Vantage
cradle is required for both wired and wireless handsets.
Note:
Be careful when installing the cradle to avoid bending the Avaya Vantage
Before you begin
Ensure that you have the following equipment:
• Avaya Vantage
• Handset cradle with a connection cable
• Handset cradle stand
Ensure that the Avaya Vantage
November 2017
LED indication
LED flashes 4 times.
LED flashes 3 times.
How to use
Press and hold the button for 2.4
seconds
Press and hold the button for 3.2
seconds
Press and hold the button for 10
seconds
™
, you also need to connect a handset cradle.
™
device
™
device is not connected to a power source.
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Connecting a handset to Avaya Vantage
Notes
None
None
Handset LED confirmation
LED flashes 4 times
LED flashes 3 times
LED flashes at 0.5 seconds rate
™
™
™
device. The handset
™
connector pins.
™
™
23