Print Manager Spool
5.3.1 Input Filter Configuration
The configuration of the input filter is performed by the Input Filter Configuration Module.
To start this module, select "Start / Programs / PRISMAspool / Input Filter Configuration".
After starting the program you can see a list of the actual configuration. If you have not con-
figured a file yet, the list is empty:
Buttons:
Close:
New:
Modify:
Delete:
An Example:
Parameters from an SAP list should be assigned to a print job. SAP sends possibly a head-
er page. An SAP list starts with some lines building up the word 'SAP' followed by different
spool parameters.
For the creation of a new 'input filter source', a job should be in the spool, which has the
format, that is to be processed.
Click 'New' to create a new 'input filter source' ('input filter source' is here used to identify
the environment from which a job comes, i.e. from SAP, PReS ...).
90
Terminates the program
A new 'input filter source' is created
Configuring a 'input filter source'
Deleting a 'input filter source'
Advanced Configuration
A29247-X30-X-9-70 US