Table of Contents
Advertisement
Installing PRISMAspool Components and Remote Administration
When installing the "Print Manager Web" component:
•
If you want to install the PRISMAspool Print Manager Web component you have to
install the Microsoft SNMP service at first. Without this component, PRISMAspool
aborts the installation and displays a corresponding error message.
How to check and install the SNMP service is described in detail in chapter "10.2 In-
stallation and Configuration of the Windows SNMP Agent", page 236.
When installing the "Extended Line Printer Server" component:
•
If you want to install the "Extended Line Printer Server" from PRISMAspool, you
need to deactivate the service "TCP/IP Print Server" from Windows. As both the Mi-
crosoft "TCP/IP Print Server" and the "Extended Line Printer Server" use the same
LPD protocol and port, they cannot be activated simultaneously. Instead, you need
to activate the "Simple TCP/IP Services", which are necessary for using "Extended
Line Printer Server".
•
After these settings, reboot your computer again to have it ready for installation
When using the parallel port
•
If you are using the parallel port the computer BIOS needs to be set to ECP mode.
Follow the instructions of your computer manual how to do this.
4.2 Installing PRISMAspool Components and Remote Administration
The PRISMAspool installation is divided into two routines:
•
Installation of PRISMASpool Components
see 4.2.1 Installing PRISMAspool Components (Setup Type "Custom"), page 25
•
Installation of the Remote Admin Feature,
see 4.2.2 Installing the Remote Administration Feature, page 33
24
Installation
A29247-X30-X-9-70 US
Advertisement
Table of Contents
