Configuration Of A Wpe Printer - Oce PRISMAspool User Manual

Configuration of a WPE printer

7.2 Configuration of a WPE printer
After a WPE has been installed, we must configure the port for the PRISMAspool usage.
On a Windows 2003 Server system e.g., select Start / Settings / Printers. Select our WPE
printer, right click on it and select "Properties".
In the printer properties dialog, select the "Port" tab. Keep the selection and then select
"Configure Port". A WPE port configuration dialog will appear.
216
Windows Print Extension
A29247-X30-X-9-70 US