System Requirements
3 System Requirements
It is recommended to use the OPS Printer Servers starting from PRISMA-Base 0 upwards
with PRISMAspool products.
Note: In various countries different hardware could be recommended.
This chapter contains information about:
•
3.1 Hardware Requirements, page 21
•
3.2 Software Requirements, page 22
3.1 Hardware Requirements
Minimum hardware requirements for PRISMAspool:
•
Pentium IV > 2 GHz processor
•
1 GB main memory; 2GB recommended and in case of large printing files.
•
30 GB free hard disk capacity
•
SVGA screen with a resolution of 800x600 or higher
•
SCSI adapter for SCSI printer: Adaptec 29160 (LVD) or
Adaptec 2944 (differential HVD).
•
Maximum number of SCSI cards : 1
•
Gigabit network card for connection of VarioStream and ColorStream family
(all VS7xxx, VS8xxx, VS92xx, VS95xx, VS96xx, VS97xx, CS10xxx)
•
Be sure to respect the requirements from the used Operating System (especially Win-
dows Vista and Windows Server 2008)
Note: Printing with a SCSI connection to a printer is not possible with the original EZ-
A29247-X30-X-9-70 US
SCSI CD from Adaptec, but only with the SCSI driver installed automatically
from the Windows CD.
Hardware Requirements
21