Automatic Handsfree; Handsfree Answerback - Northern Telecom 3X8 Owner's Handbook Manual

Programming hints
A button is automatically assigned to a telephone that
is programmed with Full Handsfree. Full Handsfree is always
disabled for an

Automatic Handsfree

Automatic Handsfree activates the Handsfree microphone and
speaker when you make or receive calls by pressing a line
button. Use the
N (No) or Y (Yes).
Programming hints
You can program Automatic Handsfree only if the telephone has
Full Handsfree set to Yes.
Handsfree Answerback
Handsfree Answerback allows you to answer a Voice Call without
lifting the receiver. Use the
setting: Y (Yes) or N (No).
Programming hints
Handsfree Answerback is always disabled for an M7100
Telephone.
Call Pickup (Group)
Each telephone can be assigned to one of up to four Call Pickup
groups. Members of a Call Pickup group can answer any calls
ringing at a telephone in the group. Use the
button to select the setting: NO, 1, 2, 3, or 4.
Programming hints
You cannot pick up a call that is on a Private line, or a call that is
ringing only the Auxiliary Ringer.
Paging
This setting determines whether a telephone has access to the
Page feature. Use the
Y (Yes) or N (No).
PO84262701
Telephone.
display button to select the setting:
display button to select the
display button to select the setting:
Owner's Handbook
Capabilities 45
display