Northern Telecom 3X8 Owner's Handbook Manual page 105

100 Call Park
Notes
When you park a call, the system assigns one of two codes for
the retrieval of the call. These codes consist of the Call Park
prefix, which may be any digit from 0 to 9, and a two-digit call
number 01 or 02. For example, if the Call Park prefix is 1, the
second parked call is assigned the call park retrieval code 102.
Your Customer Service representative sets the Call Park prefix in
Configuration programming. If the Call Park prefix is set to None,
parking is disabled.
Your Customer Service representative also sets the Call Park
Callback delay in Configuration programming. External calls
parked for longer than the program delay are returned to your
telephone.
DR5.1 Owner's Handbook
You have tried to park a conference
call. Split the conference and park the
calls separately. The person who
retrieves the calls can reconnect the
conference.
Record the code shown. Use Page
q
) or press
announce the call and its retrieval
code.
Both available retrieval codes are in
use. Transfer the call or take a
message instead.
to
PO842627 01