Northern Telecom 3X8 Owner's Handbook Manual page 192

Programming a Personal Speed Dial code:
1. Press
2. Enter a two-digit code (from 71 to 94).
3. To program a line as part of the Speed Dial code, press a line button or a line pool
button.
4. Enter the telephone number to be assigned to that code. Telephone numbers cannot
exceed 24 digits.
5. Press
q
Voice Call
Deny
Link
[Feature]
Long Tones
Pause
W h e n p r o g r a m m e d a t t h e e n d o f a n E x t e r n a l
PO84262701
T e l e p h o n e F e a t u r e C a r d
Personal:
Programs a telephone number into a Personal Speed
Dial code (from 71 to 94).
q
to enter Personal Speed Dial codes.
or to finish programming.
Prevents your telephone from receiving Voice Calls, permits only
ordinary ringing calls.
Cancel
Generates a Link signal (also called flash or recall) on an active
line to access other systems or carriers.
Permits communication with devices (such as fax or answering
machines) on an active line that use longer tone signals. The tone
lasts as long as a dial pad button is held down, and only for the
current call.
When programmed in an External
delay in a number being dialed.
For Pulse and Tone Dialing
For Pulse Dialing only
performs the same function as
sequence, inserts a
s e q u e n c e ,
O w n e r ' s H a n d b o o k
telemanuals.com