Northern Telecom 3X8 Owner's Handbook Manual page 206

Memory and line buttons
you while using features. The lower
line of the display is reserved for display
Display buttons
Dial pad
appear beside active lines and features.
Display buttons change with each feature you
Using display
use. The labels for display buttons appear in
buttons
capital letters directly above them on the
second line of the display. A display button
with an "OK" label above it is represented as
in this card.
Confirm that your memory and line buttons have the correct snap-on caps by
Button inquiry
checking their programming.
1. Release all calls or open lines with dial tone.
2.
Press
3. Press the button(s) you want to check and read the display.
4. Press
1. Press
Adjusting display
2. Press
contrast
3. Press
Selecting a ring type
2. Press
and volume level
3. While the telephone is ringing, press
4. Press
Meridian and are trademarks of Northern
PO84262701
when finished.
or for the level you want.
when finished.
[Feature
q
, or to hear the different types of rings.
softer
to store the ring.
M7324 User Card
to adjust the volume.
louder
DR5.1 Owner's Handbook