Northern Telecom 3X8 Owner's Handbook Manual page 223

A telephone
Private network:
network consisting of owned or
leased telephone lines used to
connect different offices of an
organization independently of
the public network.
Private to: A line assigned to
one telephone as a Private line
by your Customer Service
representative. The line cannot
appear on any other telephone,
except the Prime telephone for
that line. Private lines cannot be
placed into Line Pools.
Programming: A series of
procedures that set the way the
system works.
Programming includes
system-wide settings and
individual telephone and line
settings.
Programming Overlay: See
Programming Overlay.
Programming reminder:
chart on which you can record
some commonly-used settings
to distribute to all
telephone users.
Public line: An external line
that can be assigned to any
telephone and to many
telephones. A line is assigned
as Public by your Customer
Service representative.
Public network: The regular
telephone network that
connects most homes and
businesses.
PO842627 01
Recall: See Link time.
Receiver: The handset of a
telephone.
Redirect ring: A setting in
Administration programming
that allows you to set whether a
line that has been redirected
using Line Redirection gives a
short ring on those telephones
on which the line has a ringing
appearance.
Remind delay: A feature that
causes a telephone to beep and
display the message
On hold:
has been on hold for a
programmable period of time.
This period is the Remind delay,
and is programmed by your
C u s t o m e r S e r v i c e
representative.
A
Restrictions: A component of a
Dialing filter. Restrictions are
numbers you cannot dial when
that Dialing filter is in effect. See
Exceptions.
Ringing: A programming
function done by your Customer
Service representative that
assigns a line to ring or not ring
at a telephone. If a line has
been assigned as "No ring", an
incoming call is shown only by a
flashing indicator.
DR5.1 Owner's Handbook
Glossary 219
when a call