Programming Details - Northern Telecom 3X8 Owner's Handbook Manual

Programming details

Entering numbers
Numbers are entered from the
display button may be used to edit the number.
Line numbers must always be entered as a two-digit number with
a leading zero. Internal telephone numbers, also referred to as
Directory Numbers
Viewing long telephone numbers
External telephone numbers can be up to 24 digits, but the
telephone display is only 16 character spaces long. If you wish to
see a previously programmed number that is longer than 16
digits, you must do the following:
Begin, for example, with
The display shows only the first 15 digits. The three dots
the end of the display indicate that more digits remain to be
displayed for the external number.
1. To see the remaining digits, press
2. To see the first 15 digits again, press
PO84262701
Programming 21
telephone dial pad. The
are always two-digits long.
DR5.1 Owner's Handbook
at