Northern Telecom 3X8 Owner's Handbook Manual page 87

82
Button erased
and HOLD
P r o g r a m m e d
DR5.1 Owner's Handbook
While programming External Autodial,
you pressed or [Hold] before
entering any digits. This erases the
button.
Enter the number you wish to program
exactly as you would if you were
dialing it yourself.
You cannot program an
button while you are on a call. Finish
your call or place it on hold before
programming an button.
Enter the internal telephone number
you wish to program.
Press the memory button you want to
program.
This display pertains only to the
M7208 Telephone. Enter the number .
you want to program onto the button,
then press You may
include a line or line pool selection in
an sequence by selecting the
line before entering any digits.
Enter the number you want to program
onto the button, then press [Hold)
or You may include a line or line
pool selection in an
by selecting the line before entering
any digits.
The number is stored on the button.
P O 8 4 2 6 2 7 0 1
sequence