Northern Telecom 3X8 Owner's Handbook Manual page 198

Pick up the receiver.
Internal calls
2. Dial the internal number.
1. Pick up the receiver.
External calls
2. Dial
3. Dial the external telephone number.
internal numbers and the external access code are supplied by your
System Coordinator.
The M7100 telephone allows you to have two calls active at the same-time.
Making and
By using
answering a second
call
To answer a second call while on another call
1. Press
The second call automatically comes onto the line.
To hold a call and make a second call
1. Press
2. Dial the telephone number for the second call.
To return
1. Press
The second call is automatically put on hold.
To hold a call
1. Press [Hold) .
2. Press
Check the display for confirmation or additional information.
PO84262701
(or your system's external line access code).
you can switch between calls.
to put the first call on hold.
to put the first call on hold.
the first call
again to return to the first call on hold.
again to return to the call on hold.
User Card 193
DR5.1 Owner's Handbook