Dialing; Owner's Handbook - Northern Telecom 3X8 Owner's Handbook Manual

202 M7324 User Card
About line buttons
buttons on your telephone with the ones below for instructions on how to use
them.
internal calls using Intercom buttons
1. Pick up the receiver.
[ L i n e ]
2. If
button, then dial.
OR
Press an Intercom button without
Note: Internal numbers are supplied by your system coordinator.
Internal calls using extension
buttons
1. Pick up the receiver.
2. When
extension button, then dial.
Holding Calls
1. Press The
2. Press the line button with the flashing
Automatic hold
Calls are put on hold automatically when you switch from one line to another.
This button operates the telephone's built-in microphone and speaker in place
of the receiver. Your System Coordinator can program Handsfree to your
telephone.
Making calls
1. Press
Switching between Handsfree and handset
1. Press
2. Pick up the receiverto switch back.
Using Mute
1. Press
2. Press
Pressaline button without
Dialing without
2. When answered, pick up the receiver, or press
lifting the handset
3. If the call is not answered,

Owner's Handbook

systems can have different types of line buttons. Match the line
appears beside an Intercom
then dial.
appears beside an
beside the line on hold.
displayforconfirmation or additional information.
instead of picking up the receiver.
and replace the handset to switch to Handsfree.
to turn the microphone OFF.
again to turn the microphone ON.
then dial your call.
line is busy, press
External calls using numbered Line
buttons
1. Pick up the receiver.
2. When appears beside a
numbered Line button, then dial.
OR
Press a numbered Line button
without then dial.
External calls using extension
buttons
1. Pick up the receiver.
2. When appears beside the
extension button, then dial
your system's external line access
code) and the number.
to return to the call.
PO842627 01
(or