Northern Telecom 3X8 Owner's Handbook Manual page 173

168 Speed Dial
Displays
You will see some of these prompts while using or programming
Speed Dial.
Line in
Owner's Handbook
Continue entering the number you
wish to program. You can change the
number by pressing the left side of the
volume bar or by pressing
you are finished, press
You have tried to program a Personal
Speed Dial number while someone
else on the system is in Configuration
or Administration programming.
You have tried to enter a new
Personal Speed Dial Number, but the
memory for these numbers in your
system is full.
Enter a two-digit code between 71 and
94 for the Personal Speed Dial
I
number you want to program.
Enter the telephone number you wish
to program exactly as you would if you
were dialing it normally. When you are
finished, press [Hold] or
You have entered a code outside the
code range (01-94).
The line associated with the Speed
Dial number you are trying to use is
b u s y .
There is no number stored on the
Speed Dial code you have dialed.
When
or
PO842627 01