Northern Telecom 3X8 Owner's Handbook Manual page 201

196 M7208 User Card
About line buttons
buttons on your telephone with the ones below for instructions on how to use
them.
Internal calls using Intercom
1. Pick up the receiver.
2. If
button, then dial.
O R
Press an Intercom button without
Note: Internal numbers are supplied by your System Coordinator.
Internal
b u t t o n s
1. Pick up the receiver.
2. When
extension button, then dial.
H o l d i n g C a l l s
1. Press (Hold] . The
2. Press the line button with the flashing
Check the display for confirmation or additional information.
A u t o m a t i c h o l d
Calls are put on hold automatically when you switch from one line to another.
This button operates the telephone's built-in microphone and speaker in place
of the receiver. Your System Coordinator can program Handsfree to your
telephone.
M a k i n g c a l l s
1.
Switching
1.
2. Pick up the receiverto switch back.
U s i n g M u t e
1.
2.
1. Pressaline button without
Dialing without
2. When answered, pick up the receiver, or press
lifting the handset
3. If the call is not answered, or the line is busy, press
DR5.1 Owner's Handbook
systems can have different types of line buttons. Match the line
appears beside an Intercom
then dial.
calls using extension External
b u t t o n s
appears beside an 2. When
beside the line on hold.
instead of picking up the receiver.
between Handsfree and handset
and replace the handset to switch to Handsfree.
to turn the microphone OFF.
again to turn the microphone ON.
then dial your call.
E x t e r n a l c a l l s u s i n g n u m b e r e d l i n e
b u t t o n s
Pick up the receiver.
2. When appears beside a
numbered Line button, then dial.
O R
Press a numbered Line button
without then dial.
calls using extension
Pick up the receiver.
appears beside the
q
extension button, dial
(or your system's external line
access code) and the number.
return to the call.
.
PO84262701