Northern Telecom 3X8 Owner's Handbook Manual page 174

and HOLD
a 1
dial>
Notes
There is no difference between using Personal Speed Dial and
using System Speed Dial. They differ only in how you program
them.
Speed Dial numbers may include line choices and Host System
Signaling codes.
Speed Dial numbers are subject to the same Class of Service as
regularly dialed numbers. System Speed Dial numbers can be
programmed to bypass dialing restrictions.
Normally, Speed Dial numbers are shown on the display while
they are being dialed. System Speed Dial numbers may be
programmed to show a Speed Dial name instead of the number,
keeping the actual number confidential.
PO842627 01
This display pertains only to the
M7208 Telephone. If you want to
program a line or line pool selection
for this Speed Dial, select the line or
line pool button. Otherwise, enter the
telephone number you wish to
program exactly as you would if you
were dialing it normally. When you are
finished, press [Hold].
If you want to program a line or line
pool selection for this Speed Dial,
select the line or line pool button.
Otherwise, enter the telephone
number you wish to program exactly
as you would if you were dialing it
normally. When you are finished,
press or
There is no line associated with the
Speed Dial number you are trying to
I
use. Select a free external line or line
pool and enter the Speed Dial feature
code again.
Enter a two-digit Speed Dial code
(01-94). You must enter the zero for
I
codes 01 to 09.
DR5.1 Owner's Handbook
Speed Dial 169