Priority Call; Allow Last Number Redial; Allow Saved Number Redial - Northern Telecom 3X8 Owner's Handbook Manual

50 Caoabilities

Priority Call

This feature lets you call from your
interrupt calls or override Do Not Disturb on another
telephone. Use the
N (No) or Y (Yes).
Programming hints
Apply this feature only to telephones from which such
interruptions can be justified.

Allow Last Number Redial

A telephone's ability to use Last Number Redial can be turned
on or off. Press

Allow Saved Number Redial

A telephone's ability to use Saved Number Redial can be turned
on or off. Press
Allow Link
The ability of a telelphone to use Link (a host system signaling
option) can be turned on or off. Press CHFINGE to select the
setting: N (No) or Y (Yes).
Answer Timer
A timer can be used to administer a delay between the last digit
you dial on a device connected to an analog terminal adaptor
and when the system begins to send out tones
modem) on the outgoing line without capturing and interpreting
them. To change the delay time, press
setting (in seconds):
If the DN you are programming is the internal analog terminal
adapter you may also select Use ringback. When this
setting is selected, the system's built-in
used to regulate the connection between analog devices.
DR5.1 Owner's Handbook
telephone and
display button to select the setting:
to select the setting: N (No) or Y (Yes).
to select the setting: N (No) or Y (Yes).
to select the
Ans timer: 3, 5, 7, or 10.
detection will be
PO84262701