8
Specifying the default settings
You can change the default settings for displaying the confirmation
messages or the dialog box for entering the authentication settings.
1
Click the [Start] button, and then click "Control panel", "Hardware and
Sound", and "Printers".
–
If the control panel is in the classic view, double-click "Printers".
2
Right-click the icon of the installed printer, and then click "Properties".
3
Click the Settings tab.
4
Specify settings for the following:
–
EMF Spool: When using an original system environment, select this
check box if a metafile (EMF) spool is required. This function is only
available with the Windows Vista/Server 2008 PCL driver (VXL).
–
Display Constraint Message: Specifies whether to display a
message when functions that cannot be specified at the same time
were enabled from the printer driver.
–
Display paper set in Print Server Properties: Specifies whether to
use the paper that was added in [Server Properties] of the printer
folder.
–
Popup Authentication Dialog when printing: Displays the User
Authentication/Account Track dialog box when a print job is
specified to enter a user name or a department name.
8-42
Setting up the VXL/VPS driver (Windows Vista/Server 2008)
bizhub 362/282/222