Specifying User Authentication Settings - Konica Minolta bizhub 362 User Manual

6

Specifying user authentication settings

When the authentication settings have been applied on this machine, a user
name and password must be entered.
1
Click the Setup tab.
2
Click the [User Authentication/Account Track] button.
3
Select the "User Authentication" check box, and then enter the user
name and password.
4
Click the [OK] button.
Note
If a print job is sent using a user name or password that is not a registered
account on this machine or if a job is sent without the "User
Authentication" check box selected, this machine cannot authenticate
the operation and cannot print. When this occurs, the sent job is deleted.
When user authentication is specified on this machine and the Enhance
Security mode is enabled or when Access Lock is enabled on the
software DIP switch, the corresponding user may be locked out and
denied access if the authentication information is not entered correctly.
For details on user authentication and Enhance Security mode, refer to
User manual [Copy Operations].
6-18
Setting up the PCL driver
bizhub 362/282/222