Installing The Printer Driver Using Plug And Play; For Windows 2000 - Konica Minolta bizhub 362 User Manual

Installing the printer driver

Installing the printer driver using Plug and Play

For Windows 2000

1
After using a parallel cable or a USB cable to connect this machine to
a computer, turn the main power of this machine on.
– Do not disconnect or connect the cable while the computer is
starting up.
2
Start the computer.
The Found New Hardware Wizard starts up.
3
Insert the DVD-R into the computer's DVD-R drive.
4
Select "Search for a suitable driver for my device (recommended)", and
then click the [Next] button.
5
Select "Specify a location", and then click the [Next] button.
6
Specify the folder on the DVD-R that contains the printer driver for the
operating system that you are using, and then click the [OK] button.
Printer drivers that can be selected:
7
Click the [OK] button, and then follow the on-screen instructions.
8
Click the [Finish] button.
9
When installation is complete, make sure that the icon of the installed
printer appears in the Printers window.
10
Remove the DVD-R from the DVD-R drive.
This completes the printer driver installation.
bizhub 362/282/222
3
3-9