For Netware 4.X Remote Printer Mode (Nds) - Konica Minolta bizhub 362 User Manual

Setting up network printing
7
Restart this machine (turn the main power off, then on again).
8
Use the NetWare server console to load MONITOR.NLM.
9
Select the connection information and, in the active connection
column, check that the created Pserver is connected.
Reminder
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The
machine may not operate correctly if it is turned on immediately after
being turned off.

For NetWare 4.x Remote Printer mode (NDS)

1
Log on to NetWare as an administrator from a client computer.
2
Start up NWadmin.
3
Select either the organization or organizational unit container that
offers the print service, and then click "Print Services Quick Setup" on
the "Tools" menu.
4
Enter the appropriate names in the "Printer Server Name", "Printer
Name", "Print Queue Name", and "Print Queue Volume" fields, select
"Other/Unknown" from the "Printer type" field, and then save the
specified settings.
– For queue user privileges, printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare
documentation, and specify settings as necessary.
bizhub 362/282/222
4
4-27