For Windows Vista/Server 2008 - Konica Minolta bizhub 362 User Manual

Installing the printer driver

For Windows Vista/Server 2008

1
After using a parallel cable or a USB cable to connect this machine to
a computer, turn the main power of this machine on.
– Do not disconnect or connect the cable while the computer is
starting up.
2
Start the computer.
The Found New Hardware dialog box appears.
– If the Found New Hardware Wizard dialog box does not appear,
turn off this machine, then on again.
– When turning off the power, then on again, wait at least 10 seconds
before turning it on again. Otherwise, this machine may not function
properly.
3
Click "Locate and install driver software (recommended)".
The dialog box prompting you to insert the disk appears.
4
Insert the printer DVD-R into the computer's DVD-R drive.
The information on the disk is retrieved. A list of software supporting
this machine appears.
5
Specify the name of the desired printer driver, and then click the [Next]
button.
– Printer drivers that can be selected:
Windows Vista/Server 2008: Konica Minolta PCL driver (VXL),
Konica Minolta PostScript driver (VPS)
6
Follow the on-screen instructions.
– If the "User Account Control" window appears, click the [Continue]
button.
– If the dialog box of Windows Security appears, click "Install this
driver software anyway".
7
When the installation is completed, click the [Close] button.
8
When the installation is completed, make sure that the icon of the
installed printer appears in the Printers window.
9
Remove the DVD-R from the DVD-R drive.
This completes the printer driver installation.
bizhub 362/282/222
3
3-11