Specifying Account Track Settings - Konica Minolta bizhub 362 User Manual

7
Note
If a print job is sent using a user name or password that is not a registered
account on this machine or if a job is sent without the "User
Authentication" check box selected, this machine cannot authenticate
the operation and cannot print. When this occurs, the sent job is deleted.
When user authentication is specified on this machine and the Enhance
Security mode is enabled or when Access Lock is enabled on the
software DIP switch, the corresponding user may be locked out and
denied access if the authentication information is not entered correctly.
For details on user authentication and Enhance Security mode, refer to
User manual [Copy Operations].
!
Detail
For user authentication settings, consult the administrator of this
machine.

Specifying account track settings

If account track settings have been specified on this machine, you must
enter a department name and password.
1
Click the Setup tab.
2
Click the [User Authentication/Account Track] button.
7-16
Setting up the PostScript driver (Windows)
bizhub 362/282/222