Document Hold Time; Postscript Error Report - Konica Minolta bizhub 362 User Manual

11

Document Hold Time

You can specify the minutes until a job that is being received is deleted when
the memory has exceeded capacity when spooling. (Default setting: 5 M.)
% After using the keypad to type in a
value, touch [Enter].
– 0to30: Specifies the time in which
to delete the data.
Note
If a value outside of the allowable range is specified, the setting cannot
be changed even when [Enter] is touched. Type in a value within the
allowable range.
To cancel changes to the settings, touch [Cancel].

PostScript Error Report

You can specify whether to print the error message when an error occurs
during PS rasterization. (Default setting: OFF)
% After changing the setting, touch
[Enter].
– ON: Prints the error message.
– OFF: Does not print the error
message.
11-6
Various settings
bizhub 362/282/222