Table of Contents
Advertisement
System Configuration
Configuring the Camera(s)
Rev 1.02
Note
Remember that you must associate a camera with an HTRD400 Recorder
before you can create a record rule based on that camera.
To configure camera(s) that are connected to an HTRD400 Recorder:
1.
From the Trigger Summary in the HTRD400 System Setup Wizard, click Next. The
Camera Summary displays.
Figure 5-8
Camera Summary
2.
Click Add for each connected camera to open the Camera Selection dialog box.
50
The Edit, Remove,
and Replace
buttons become
active after a
camera has been
added.
Document 900.0328
05/05
Advertisement
Table of Contents
