Figure 5-15 Rule Configuration (Triggers); Table 5-9 Rule Configuration Start Fields - Honeywell HTRD400 Reference Manual

Table 5-9 Rule Configuration Start Fields
Field
Name
Priority
Description
Enabled
Rev 1.02
3. Follow Table 5-9 to name and enable the record rule and provide a description.
Description
Create a unique name for the rule. The name can be up to 20 characters in
length, in any combination of:
a-z, A-Z, 0-9
, (comma)
. (period)
- (hyphen)
#
*
"
Note This field must be completed.
Displays a priority (1 to 9), 1 being the highest. At any time the HTRD400
Recorder reacts to the recording rule with the lowest number (highest priority)
first. This is a non-editable field. You can change the priority on the Rule
Summary (see Figure
Enter your own description, if desired.
Select the check box to have the HTRD400 Recorder start recording when all
rule conditions are met.
4. Click Next to go to the Rule Configuration (Triggers) screen.
Note You must add a trigger to a record rule.
Figure 5-15 Rule Configuration (Triggers)
5. Click Add. The Add Triggers dialog box displays.
HTRD400 System Reference Guide
5-22).
57 Document 900.0328
05/05