Table of Contents
Advertisement
Solutions
Rev 1.02
Clip Status Messages
The following table describes the images that display on the Player screen:
•
When the recorder experiences video loss from the camera
•
When you select a clip to view
The following screens are generated by the camera.
The camera is operational but is not
receiving any data from the video sensor.
This is typically a temporary state. If the
condition persists, contact Honeywell
Technical Support (see
Warranty and
Service, page xi).
The camera processor is initializing.
The camera is changing resolution.
146
Document 900.0328
05/05
Advertisement
Table of Contents
