Table of Contents
Advertisement
Mounting the HTRD400 Recorder
Rev 1.02
The HTRD400 Recorder is intended for indoor use only. It can be mounted horizontally
(suspend or support mounted) or vertically.
mount the HTRD400 Recorder. Use the two L-brackets supplied with the install kit to mount
it in any of the ways shown.
Figure 2-3
Installation Mounting Options
Horizontal mount
Vertical mount
1.
Prepare the mounting surface. Mark and pre-drill holes for the four #10 x 3/4 inch
sheet metal mounting screws included in the hardware package.
2.
Attach the L-brackets (supplied) to the mounting surface using the sheet metal
mounting screws supplied. If desired, you may also use a suitable substitute.
3.
Secure the HTRD400 Recorder to the two L-brackets with #10-32 x 3/8 inch machine
screws (supplied).
HTRD400 System Reference Guide
Figure 2-3
shows all the possible ways to
13
Side mount
Document 900.0328
05/05
Advertisement
Table of Contents
