Table 2-1 Installation Locations - Honeywell HTRD400 Reference Manual

Rev 1.02
Table 2-1 lists recommended location options for a bus installation.
Table 2-1 Installation Locations
Location
Bottom of glove box -
horizontal mount
Inside glove box - horizontal,
vertical mount
Bottom of passenger seat
behind bus driver - horizontal
mount
Underneath bulkhead -
horizontal mount
Front of bulkhead - vertical
mount
Console - horizontal mount
Console - vertical mount
Beside driver seat - horizontal
mount
Caution Do not install the HTRD400 Recorder unit on the floor or on the
transmission access hatch. These locations have the highest levels of
vibration and may be subject to water damage.
Figure 2-2 shows possible mounting locations inside a bus and
different mounting options.
HTRD400 System Reference Guide
Convenient Easy to
operation install
11
Low Good air
vibration flow
Figure 2-3 shows the
Document 900.0328
05/05