Configuring the IP Phone 1140E
9. Choose one of the following:
•
If the name of your headset appears in
the Paired: box, proceed to step 11.
•
If more than one device is paired, and
the one you wish to use is not shown in
the Paired: box, navigate to the one you
want, as follows:
a. Press the
or more times to highlight the
Paired: box. Press the
key to start the edit mode.
b. Press the
to open the list. Press the
navigations key to scroll in the
Paired: list and highlight your
headset.
c. Press the
the headset and close the list. Press
the
Select/Set
Right
navigation key one
Select/Set
Up/Down
navigation key
Up/Down
Select/Set
key to select
key to exit edit mode.
73