Setting The Domain - Nortel 1140E User Manual

"Your User Profile" on page 52
"Overwriting your personal Address Book" on page 54
Note: The system automatically logs you back in after a power
outage or firmware upgrade. This feature is a network wide
configuration that the system administrator sets up.

Setting the domain

During the login process, if you need to change the domain or confirm the
domain you log into is correct, press the
key from the login screen. The current domain appears on the
IP Phone 1140E LCD screen. You can edit the domain that is listed or
press the Domains
domains to which you can choose to connect.
Note: You should check with your system administrator before editing
or changing domains.
To change the domain:
Domains
or
Edit
Context-sensitive soft key to access a list of available
1. Choose one of the following:
Done — Press the
— Press the
Note: You can edit the domain to which
the IP Phone 1140E connects. Contact
your system administrator before editing
the domain.
Accessing the IP Phone 1140E
Domain Context-sensitive soft
Domains
sensitive soft key to change the
current domain.
Done Context-sensitive
soft key to keep existing
configurations and return to the User
Login screen.
Context-
45