Nortel 1140E User Manual page 70

Configuring the IP Phone 1140E
70
4. Search devices.
a. Ensure that your headset is in
Pairing or Search Mode.
b. Press the
twice, and highlight the
button, displayed next to the Search
Devices item.
c. Press the
The message "Searching...." appears. It
can take up to two minutes for the
search to complete.
If the search is successful, the message
"Search Completed Found Device(s)"
appears, and a list of devices that
support Bluetooth wireless technology
appears in the Found: list.
d. Choose one of the following:
— If the search is successful, proceed
to step 6.
— If the search is not successful, the
message "Search completed. No
device found" appears. If this
happens, or if the headset times out
and exits search/pairing mode,
power off the headset, and repeat
steps 4 and 5.
If pairing is still unsuccessful, pair
the phone to another wireless
headset, or contact the headset
vendor.
Right navigation key
Search
Select/Set key.