Nortel 1140E User Manual page 72

Configuring the IP Phone 1140E
72
7. Press the Right
more times to highlight the
(next to the Pair Device item) and press
the Select/Set
a. A dialog box appears, with the
prompt "Enter PIN#".
b. Use the telephone dialpad to enter
the PIN for the wireless headset and
press the
Check your headset documentation
to find the headset PIN or passkey.
Often, the PIN or passkey is 0000
8. Choose one of the following:
• If the headset is successfully paired with
your phone, proceed to step 10. To
verify that the pairing was successful,
ensure that the headset appears in the
list next to the Paired: item. If pairing is
successful, the message "Pair
completed" also appears at the bottom
of the screen.
• If the headset is not successfully paired
with your phone, an error message
appears at the bottom of the screen. If
an error message appears:
— Confirm that the wireless headset is
still in search/pair mode.
— If the headset timed out and exited
search/pairing mode, put the
headset in pairing mode, as
discussed in step 4, and repeat step
8.
— Check that you are using the correct
PIN and repeat step 8.
navigation key one or
Pair
key.
Select/Set key.
button
.