Nortel 1140E User Manual page 69

Note: Nortel recommends that you not pair more than one headset of
the same model, because they have identical names in the Paired:
list.
To pair a wireless headset with your phone:
Configuring the IP Phone 1140E
1. Double-press the
the Bluetooth Setup dialog box.
The Enable Bluetooth
highlighted.
If the Bluetooth Setup menu fails to open
when you double press the Headset key,
Bluetooth wireless technology feature is
not enabled on your phone. Contact your
administrator.
2. Press the Select/Set
Bluetooth wireless technology.
A check mark appears to indicate that
the feature is activated. The message
"BT Enabled" appears at the bottom of
the display.
3. Put your Bluetooth wireless technology
headset in its pairing or search mode.
The procedure for doing this can be
different for each headset. Refer to the
documentation that accompanied your
headset, or contact the vendor.
Headset key to open
check box is
key to activate
69