Connecting To The Server Directly - Avaya S8500 Installing And Configuring

Connecting to the server directly

To access the server directly, use a computer with the following minimum specifications:
A Windows 2000 or Windows XP operating system
32-MB of RAM
40-MB of available disk space
An RS-232 port connector
A network interface card (NIC) with a 10/100BaseT Ethernet interface
A 10/100 BaseT Ethernet, category 5 or better, cross-over cable with an RJ45 connector
on each end (MDI to MDI-X)
A CD-ROM drive
1. Plug one end of the CAT5 cable into the Services access port on the back of the server.
For more information, see
Server on page 94. Plug the other end of the CAT5 cross-over cable into the NIC on your
computer. Use a NIC adapter if necessary.
2. Configure your network connection
IP address: 192.11.13.5
Subnetwork mask: 255.255.255.252
For specific information, see
page 99.
Once you connect, use a terminal emulation program or a Web browser to administer the
server.
Installing and Configuring the Avaya S8500 Server
Services laptop computer connected directly to the S8500
Configuring the network for Windows 2000 and XP
Connecting to the server directly
January 2008
on
93