10.2
WAN-LAN Bridge
WAN bridge creates a bridge over WAN and LAN devices. In this way, PCs on the
(ProductNameGeneric)'s LAN side can get IP addresses that are known on the WAN side.
10.2.1 Creation with the Connection Wizard
To configure an existing bridge or create a new one:
1.
Click the link 'New Connection' in the screen 'Network Connections'; the screen
'Connection Wizard' opens.
2.
Select the radio button 'Advanced Connection' and click 'Next'; the screen 'Advanced
Connection' opens.
3.
Select the radio button 'Network Bridging' and click 'Next'; the screen 'Bridge Options'
opens (refer to the figure below).
4.
Select whether to configure an existing bridge (this option will only appear if a bridge
exists) or to add a new one:
MP-202 Telephone Adapter
Figure 10-27: Bridge Options
114
User's Manual
Document #: LTRT-50605