Bridge Settings; Figure 10-31: Bridge Settings - AudioCodes MP-202 User Manual

MP-202 Telephone Adapter

10.2.4 Bridge Settings

The bridge section allows you to specify the LAN and WAN devices that you would like to
join under the network bridge. Click the icon 'Edit' on the VLAN column to assign the
network connections to specific Virtual LANS. Select the check box 'STP' to enable the
Spanning Tree Protocol on the device. You should use this to ensure that there are no
loops in your network configuration, and apply these settings if your network consists of
multiple switches, or other bridges apart from those created by the Telephone Adapter.
Version 2.6

Figure 10-31: Bridge Settings

117
10. VLAN and Bridge Settings
May 1