Examples Of Configuring Vlans In Bridge Mode; Example 1 - Configuring 3 Vlans: Voip, Data And Management; Figure 10-32: Example Of Using Bridge Mode And Configuring Vlans - AudioCodes MP-202 User Manual

10.2.5 Examples of Configuring VLANs in Bridge Mode

10.2.5.1 Example 1 - Configuring 3 VLANs: VoIP, Data and Management

This example explains how to configure the MP-202 to use 3 separate VLANs (for VOIP,
data and management) in bridge mode.

Figure 10-32: Example of Using Bridge Mode and Configuring VLANs

Setup
Two MP-202s are connected to the switch. Both are configured to use VLAN 200 for VOIP,
VLAN 300 for Data and VLAN 400 for Management. Three DHCP servers are connected to
the same switch (optional; you can use a static IP address for each VLAN). One uses
VLAN 200, the second, VLAN 300, and the third, VLAN 400.
To configure 3 separate VLANs in bridge mode:
1. (For MP202-1 & MP202-2; refer to the figure above) Connect the PC to MP202-1 LAN
NIC and use static IP address 192.168.2.10 for your PC.
2. In Internet Explorer, browse to http://192.168.2.1
MP-202 Telephone Adapter 118
User's Manual
Document #: LTRT-50605