Figure 13-3: Contents Of The Configuration File - AudioCodes MP-202 User Manual

1. Click the icon 'Configuration File' in the 'Advanced' screen of the Web-based
management; the 'Configuration File' screen is displayed (refer to the figure) showing
the entire contents of the configuration file.
2. You can customize the displayed configuration file, by selecting the following check
boxes:
•
'Display modified configuration fields only': only the configuration parameters that
have values other than default values are displayed.
•
'Display configuration in flat ini-file format': the configuration file is displayed in flat
INI-file format.
3. Click the button 'Load Configuration File' to restore your configuration from a file and
restart the gateway.
4. Click 'Save Configuration File' to back up your current configuration to a file. Note that
the file is generated according to the selected display option (in Step 2).
The saved configuration file can be used as a backup for the specific gateway's
configuration, for creating a configuration file for remote configuration update, and also for
debugging and diagnostics.
When creating a configuration backup, disable the two display check boxes (i.e. save a full
configuration file in the hierarchic conf format). This file can be loaded back to the same
gateway, using the procedure described in ''Loading From a Computer in the Network'' on
page 167.
MP-202 Telephone Adapter

Figure 13-3: Contents of the Configuration File

166
User's Manual
Document #: LTRT-50605