General; Internet Protocol Settings; Figure 10-30: Connection Summary - Configure Existing Bridge - AudioCodes MP-202 User Manual

Important notes:
The same connections cannot be shared by two bridges.
A bridge cannot be bridged.
Bridged connections will lose their IP settings.
5. Click 'Next'; the screen 'Connection Summary' opens (refer to the figure below),
corresponding to your changes.

Figure 10-30: Connection Summary - Configure Existing Bridge

6. Check the check box 'Edit the Newly Created Connection' to be routed to the new
connection's configuration screen after clicking 'Finish'.
7. Click 'Finish' to save the settings; the new bridge is added to the network connections
list; it's configurable like any other bridge.

10.2.2 General

Refer to ''General'' on page 100.

10.2.3 Internet Protocol Settings

Refer to ''Internet Protocol Settings'' on page
MP-202 Telephone Adapter
79
116
User's Manual
Document #: LTRT-50605